雙組份打膠機是否可以打三層中空玻璃！
現在我們生產6a9a12a。如果您需要做門窗子架，您需要37a或更大的尺寸。建議選用電機膠帶捆扎機。
Now we produce 6a9a12a. If you need to make door and window racks, you need 37a or larger size. It is suggested to use electric tape binding machine.
使用兩套完全獨立的橡膠供應系統(包括混煉機)和膠槍混煉，對于大尺寸和小尺寸的玻璃加工影響和使用都很小，可以說沒有限制。如果你想膠水的話,好的方法是使用中空玻璃自動橡膠機,不需要太高的技術,基本的人民有能力,速度快,橡膠也漂亮,手動涂層是熟練工人,多實踐,好的膠主速度也非?？?也非常好看。
The use of two completely independent rubber supply systems (including mixers) and rubber gun mixing has little impact on the maximum and minimum sizes of glass processing and can be said to be unlimited. If you want glue, the best way is to use the hollow glass automatic rubber machine, do not need too high technology, the basic people have the ability, speed, rubber is beautiful, manual coating is skilled workers, more practice, good glue master speed is very fast, also very good.
很多情況下玻璃的尺寸都是正常的，那么對于中空玻璃膠機來說，常見的，只有按照正常的方式和操作流程來做，對于生產玻璃來說是非常簡單的，少數情況下會出現異形中空玻璃，那能起到什么作用呢?讓我們來分析:
In many cases, the size of glass is normal, so for hollow glass glue machine, the most common, only according to the normal way and operation process to do, for the production of glass is very simple, in a few cases there will be special-shaped hollow glass, what role can that play? Let's analyze:
現場使用因素使玻璃廠做玻璃型材，如果使用的橡膠設備可以保證。
Firstly, on-site use factors make glass factory to make glass profiles, if the use of professional rubber equipment can be guaranteed.
其次，工人在切割玻璃時出現了一個錯誤，導致玻璃的形狀不規則。如果邊緣不能磨尖或去除，不要擔心。
Secondly, the worker made a mistake in cutting the glass, which resulted in the irregular shape of the glass. If the edges cannot be sharpened or removed, don't worry.
第三塊玻璃本來就是異類，沒有辦法調節尺寸和四周，也沒有關系。
The third piece of glass is different in nature. There is no way to adjust the size and surroundings, nor does it matter.
膠槍和膠頭由工人控制。玻璃的一端放在膠桌上，可以控制玻璃在不移動人的情況下旋轉。如果將異形玻璃固定好，則由人移動膠槍進行戰斗，手中膠槍的開關可以配合工作。
Guns and rubber heads are controlled by workers. One end of the glass is placed on the rubber table, which can control the glass to rotate without moving people. If the special-shaped glass is fixed properly, the battle will be carried out by moving the rubber gun, and the switch of the rubber gun in hand can cooperate with the work.
上一篇：?雙組份打膠機的結構原理操作注意事項
下一篇：濟南雙組份打膠機介紹安裝的順序是怎樣的？
