美女被免费网站视频九色-美女被啪到哭网站在线观看-美女被拍拍拍拍拍拍拍拍-美女被色-4438x亚洲最大-4444狠狠

Dispensing machine is a special dispensing machine, and so is the filling machine, but their functions are completely different, but the purpose is the same. What's the difference between them? Filling machine and dispensing machine are suitable for the industry are: automotive electronics, white household appliances, LED lighting, communications electronics and other industries.

1、膠量的不同，灌膠機一般是使用大膠量去灌膠，而點膠機是使用小膠量或是微量去點膠；用膠水組份不同，點膠機一般使用單組份膠水點膠，而灌膠機則使用雙組份膠水，灌膠機根椐不同的需要設定不同的比例，自動配比，自動混合，自動灌膠。

1. According to the different amount of glue, the filling machine usually uses a large amount of glue to fill the glue, while the dispensing machine uses a small amount or a small amount of glue to fill the glue; according to the different components of glue, the dispensing machine generally uses a single component glue to fill the glue, while the filling machine uses a two-component glue. According to different needs, the filling machine sets different proportions, automatic proportioning, automatic mixing and automatic filling.

2、供膠系統不同，點膠機通常是采用氣壓控制膠水，灌膠機則根據膠水填充料情況來選擇計量泵，不同類型的膠水選用不同的計量泵；成本方面的不同，灌膠機相對點膠機來說，會高很多，因為灌膠機有自身自動定量配比混合系統。

2. For different glue supply systems, the dispenser usually uses air pressure to control the glue, the glue filling machine selects the metering pump according to the situation of the glue filler, and different types of glue choose different metering pumps; for different costs, the price of the glue filling machine is much higher than that of the glue dispensing machine, because the glue filling machine has its own automatic quantitative mixing system.

3、使用性質不同，點膠機適用于產品點、涂、劃圓、走各種異形軌跡等，而灌膠機適用于不同形狀產品密封灌膠；點膠的精度不用，通常點膠機用膠量都比灌膠機的用膠量小，精度高，灌膠機就達不到點膠機的精度。

3. The dispensing machine is suitable for product point, coating, rounding, walking all kinds of abnormal tracks, while the filling machine is suitable for sealing filling of products with different shapes. The precision of dispensing is not required. Generally, the amount of glue used by the dispensing machine is smaller than that of the filling machine, and the precision is high, so the filling machine can not reach the precision of the dispensing machine.

4、供膠原理和結構不同，點膠機結構簡單，膠水容器都是一次性的。灌膠機結構復雜，雙組份的膠水自動配比自動混合，再自動定量灌注，需要對膠水進行智能化處理后就與點膠機一樣了；設備體積不同：點膠機一般為桌面式，體積較小。而灌膠機為落地式，體積是比較龐大。

4. The principle and structure of glue supply are different. The structure of dispensing machine is simple, and the glue container is disposable. The structure of the glue dispenser is complex, the two-component glue is automatically proportioned, automatically mixed, and then automatically quantitatively poured. After the intelligent treatment of glue, it is the same as the dispenser; the equipment volume is different: the dispenser is generally desktop type, and the volume is small. And glue filling machine is floor type, the volume is relatively large.

以上就是小編總結出來的兩者的區別所在，但是相關的產品，但他們是不一樣的，希望對大家有幫助。

The above is the difference between the two, but the related products, but they are not the same, I hope to help you.