中空玻璃打膠機配件鏈接方法！
1 中空玻璃打膠機配件鏈接方法是由各種零部件通過不同連接方式組合而成的。常用的機械連接有兩大類：一種是在機械工作時，被連接的零部件之間可以有相對位量的變化，這種連接常稱為機械功連接，如各種運動副；另一種是在機械工作時，被連接的零部件之間的相對位置固定不變，不允許產生相對運動，這種連接常稱為機械靜連接。本章主要介紹機械靜連接的內容。
1. The connection method of hollow glass dispenser parts is composed of various parts by different connection methods. There are two kinds of commonly used mechanical connections: one is that when the machine is working, there can be relative position changes between the connected parts, which is often called mechanical work connection, such as various motion pairs; the other is that when the machine is working, the relative position between the connected parts is fixed, and relative motion is not allowed, which is often called mechanical static connection. This chapter mainly introduces the content of mechanical static connection.
2 中空玻璃打膠機零件連接又可分為兩類：一類是可拆連接，即允許多次裝拆而不失效的連接，包括螺紋連接、鏈連接(包括花鍵連接和元鍵連接)和銷連接；另一類是不可拆連接，即必須破壞連接的某一部分才能拆開的連接，包括鉚焊連接、焊接和粘接等。另外還有過盈連接，其配合面大多為圓柱面，采用不同的過盈量，可以得到可拆連接或不可拆連接。過盈連接納構簡單，對中性好，承載能力高，應用廣泛。
2. The connection of hollow glass gluing machine parts can be divided into two categories: one is detachable connection, that is, the connection that allows multiple assembly and disassembly without failure, including threaded connection, chain connection (including spline connection and meta key connection) and pin connection; the other is non detachable connection, that is, the connection that can only be disassembled if a certain part of the connection must be damaged, including riveted connection, welding and bonding. In addition, there are interference connections. Most of the mating surfaces are cylindrical surfaces. Different interference values can be used to obtain detachable or non detachable connections. The interference fit connection is simple in nano structure, good for neutral, high in bearing capacity and widely used.
3 中空玻璃打膠機常用螺紋的類型主要有三角形螺紋、矩形螺紋、梯形螺紋和鋸齒形螺紋。其中，三角形螺紋主要有普通螺紋和管螺紋，前者多用于緊固連接，后者用于各種管道的緊密連接。三角形螺紋主要用于連接，而矩形螺紋、梯形螺紋和鋸齒形螺紋主要用于傳動。
The common thread types of hollow glass gluing machine are mainly triangle thread, rectangle thread, trapezoid thread and sawtooth thread. Among them, triangle thread mainly includes common thread and pipe thread, the former is mainly used for fastening connection, and the latter is used for tight connection of various pipes. Triangle thread is mainly used for connection, while rectangle thread, trapezoid thread and serrated thread are mainly used for transmission.
For more information, please visit http://www.vrqf.com.cn
上一篇：中空玻璃膠機的調試方法？
下一篇：中空玻璃打膠機膠槍堵塞的解決方案！
