PU打膠機日常保養的好壞！
PU上膠機工作特點:
Working characteristics of PU gluing machine:
1. 具有繪制點、線、弧、園、不規則曲線、連續補間輸入程序等功能，可實現三維布圖;
1. It has the functions of drawing points, lines, arcs, circles, irregular curves, continuous interpolation input program and so on. It can realize three-dimensional layout.
任意點、線、面、弧等不規則曲線連續構成sassafras函數。
The Sassafras function is composed of irregular curves such as arbitrary points, lines, surfaces and arcs.
4、高速、低噪聲調速無刷直流電動機配藥效果更好。
4. The dispensing effect of high speed and low noise speed regulating brushless DC motor is better.
5. 靜電器能在±100V內靜電
5. Electrostatic eliminator can eliminate static electricity within (+100V)
6. 配藥力自動補償功能，操作更方便。
6. The automatic compensation function of dispensing power makes the operation more convenient.
7:面陣xy，平移旋轉操作功能，反轉料板，適合不同工作定位。
7: area array xy, translation and rotation operation function, inversion material plate, suitable for different work positioning.
雙液點膠機的日常保養工作對點膠機的使用壽命包括在日常使用中的平穩狀態都有較大的影響，所以讓我們了解一下如何在日常使用中保養點膠機。
Daily maintenance of double-liquid dispensing machine has a great impact on the service life of dispensing machine, including the smooth state in daily use, so let's know how to maintain dispensing machine in daily use.
1. 更換橡膠，清洗管道。此時，關閉進給閥，打開出料閥，將剩余的橡膠物料從橡膠桶中排出。然后關閉出料閥，打開進給閥，將清洗溶劑倒入膠桶中，機體，按常規操作方式將溶劑擠出沖洗。
1. Replace rubber and clean pipes. At this time, the first step is to close the feed valve, open the discharge valve, and discharge the remaining rubber material from the rubber barrel. Then close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber drum, activate the body, and extrude and rinse the solvent according to the conventional operation mode.
2. 如進氣壓力異常，有水蒸汽，請將調壓濾清器中的水蒸汽取出或檢查氣源是否有差異。
2. If the inlet pressure is abnormal and there is water vapor, please take out the water vapor in the pressure-regulating filter or check whether the gas source is different.
3.請定期清洗機器部件，延長使用壽命。
3. Please wash machine parts regularly to prolong service life.
4. 當機器長時間停機時，應拔掉電源，這樣不僅可以延長機器的使用壽命，還可以節約大量的電能
4. When the machine shuts down for a long time, the power supply should be unplugged, which can not only prolong the service life of the machine, but also save a lot of electricity.
上一篇：視覺控制系統在涂膠設備中是什么作用？
下一篇：自動點膠機膠體的粘度對產品的影響！
